Fitilar Signal ta Cantilever guda ɗaya

1. Tsarin asali: Ya kamata sandunan siginar zirga-zirgar hanya da sandunan alamar su kasance a tsaye, flanges masu haɗawa, hannayen ƙira, flanges masu hawa da kuma tsarin ƙarfe da aka haɗa.

2. Sandar tsaye ko hannun tallafi na kwance tana ɗaukar bututun ƙarfe madaidaiciya ko bututun ƙarfe mara shinge; ƙarshen haɗin sandar tsaye da hannun tallafi na kwance yana ɗaukar bututun ƙarfe iri ɗaya da hannun kwance, wanda faranti masu ƙarfafa walda ke kariya; sandar tsaye da tushe suna ɗaukar farantin flange da haɗin Bolt da aka haɗa, kariyar faranti mai ƙarfafa walda; haɗin da ke tsakanin hannun kwance da ƙarshen sandar an haɗa shi da lanƙwasa, kuma an haɗa farantin da aka ƙarfafa walda;

3. Duk wani haɗin walda na sandar da manyan sassanta ya kamata ya cika buƙatun da aka gindaya, saman ya kamata ya zama santsi da santsi, walda ya kamata ya zama santsi, santsi, ƙarfi da abin dogaro, ba tare da lahani kamar porosity, walda slag, walda ta kama-da-wane da kuma walda da ta ɓace ba.

4. Sandunan da manyan sassanta suna da aikin kare walƙiya. An haɗa ƙarfen da ba a caji na fitilar ba, kuma an haɗa shi da wayar ƙasa ta hanyar ƙullin ƙasa akan harsashin.

5. Ya kamata a sanya sandar da manyan sassanta da na'urorin da za su iya samar da ƙasa, kuma juriyar ƙasa ya kamata ta kasance ≤10 ohms.

6. Juriyar iska: 45kg / mh.

7. Maganin bayyanar: yin amfani da galvanizing mai zafi da fesawa bayan an yi pickling da phosphating.

8. Siffar sandar siginar zirga-zirga: diamita daidai, siffar mazugi, diamita mai canzawa, bututun murabba'i, firam.